NOTICE: These articles are provided for MM3Tuning.com customers but are available to the public as a courtesy. MM3 Tuning is an authorized seller of the MM3 Tuning Platform and is a separate company from MM3 Power. MM3Power.com is the tech support and warranty service provider for the MM3 Tuning platform. Please contact them directly with any support or warranty issues.
These articles are intended for MM3 Tuning customers but are available to the public as a courtesy.
After receiving custom tunes for your MM3 Tuner, Smarty Touch or RaceMe Tuner you will need to copy these custom tunes onto the SD card. Whether your tunes were delivered by email attachments or via cloud sharing; this page shows you what your SD Card needs to look like when you are done:
When you initially put the SD Card into the computer it should look like this:
Depending on which tuner you have (Smarty Touch, MM3, RaceMe Ultra) some of the file names may be different, but the folder structure should be the same as above.
Your Custom Tunes Go In The “Custom Folder”:
Open up the “Custom” folder on the SD Card and you should see this:
Inside the custom folder you should have several folders: ecm, rtg, rtp, stock, tcm. For this article we are focusing on the ecm and rtg folders.
All Files ending with .ecm go in the custom/ecm folder:
This is how your ecm folder should appear. The names and number of tunes may vary, but all tunes that have names ending in .ecm go in this folder. Also if your files came zipped, they must be unzipped before copying into this folder.
Files ending in .rtg go in the Custom/rtg folder:
You will only get .rtg files if you bought on the fly tuning. If you were provided with files ending in .rtg, they need to be copied into the custom/rtg folder as shown above. Again, if they were sent zipped, they must be unzipped before copying into the rtg folder.
Once you have your SD Card setup like this you should be ready to move on to flashing your truck.